Still won't start

[George Miller]

Originally Posted by Dbbc

I will check if the point open on all 4 side of the cam. I did not check I assumed that all 4 sides of the cam should be the same. By the way the shaft does not have any side to side play.
Also I was wondering how snug should the rotor fit. Mine is pretty wobbly and I wonder if it is not rotating properly and does not make a spark with the contact for cylinder #1

No it should not be loose on the shaft. Just a good slip fit. You might put the body on and check the gap between rotor and cap in all 4 positions. Should be around .025 .