The Ford Barn

Dbbc · 01-19-2015, 05:50 PM

To answer some of the questios, the rotor does turn, I get a spark from the distributor cap to the head nut. I took the copper wire off the spark plug (new spark plugs, champion w16) and I have spark on 2,3,4 but not on one ( closest to radiator)

I will order a condensor and both plates in the distributor. By the way the copper end of the condensor where the screws that holds it, spins. Probably should't but I am not sure if it is defective. Should I use a upper plate with the modern condensor?

Lastly what would cause the negative side off the coil to be hot when the point are closed and the ignition on?

01-19-2015, 05:50 PM	#11
Dbbc Senior Member Join Date: Apr 2014 Location: Honolulu Posts: 116	Re: Still won't start To answer some of the questios, the rotor does turn, I get a spark from the distributor cap to the head nut. I took the copper wire off the spark plug (new spark plugs, champion w16) and I have spark on 2,3,4 but not on one ( closest to radiator) I will order a condensor and both plates in the distributor. By the way the copper end of the condensor where the screws that holds it, spins. Probably should't but I am not sure if it is defective. Should I use a upper plate with the modern condensor? Lastly what would cause the negative side off the coil to be hot when the point are closed and the ignition on?