The Ford Barn

oldskool · 08-19-2014, 01:52 PM

does anyone have a pic of the correct jack and handle and where it was stored,unlike the 48 and up there is no room behind seat. on the 42-47 pu

D. Jones · 08-19-2014, 04:42 PM

I don't have the correct jack, haven't found one yet. I store the one I'll use, if need be, under the seat on the passenger side at the end of the gas tank. I suspect that is where the original went along with the crank handle/lug wrench and crank extension.

4dFord/SC · 08-19-2014, 08:34 PM

Try Lin Stacey, the EFV8 tool guru: [email protected].

Rowdy · 08-19-2014, 09:17 PM

I am really suprised that the flathead national club does not have a tools page that show the correct tools for each year. Rod

4dFord/SC · 08-19-2014, 09:24 PM

With all the different models, versions, changes, manufacturers, etc., over the years, it would be much more than just a page.

Rowdy · 08-19-2014, 09:52 PM

Sponsored Links (Register now to hide all advertisements)

Well worth having the info out IMHO. The Model A jack page. All 10 jacks over 4 years, neatly done. http://www.mafca.com/tqa_jacks.html

I realize that it would be 5 times as big for each tool, but very useful. Likely in the pile of 60+ jacks out at the farm I have some for various years, but can't find the info and hate to post pic's of that much stuff to ID. Just a thought. Rod

08-19-2014, 01:52 PM	#1
oldskool Senior Member Join Date: May 2010 Location: shirley ny Posts: 992	1946 ford pickup jack and storage does anyone have a pic of the correct jack and handle and where it was stored,unlike the 48 and up there is no room behind seat. on the 42-47 pu

08-19-2014, 04:42 PM	#2
D. Jones Senior Member Join Date: Jan 2013 Location: Bend, Oregon Posts: 519	Re: 1946 ford pickup jack and storage I don't have the correct jack, haven't found one yet. I store the one I'll use, if need be, under the seat on the passenger side at the end of the gas tank. I suspect that is where the original went along with the crank handle/lug wrench and crank extension.

08-19-2014, 08:34 PM	#3
4dFord/SC Senior Member Join Date: May 2010 Location: Columbia, SC Posts: 1,579	Re: 1946 ford pickup jack and storage Try Lin Stacey, the EFV8 tool guru: [email protected].

08-19-2014, 09:17 PM	#4
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: 1946 ford pickup jack and storage I am really suprised that the flathead national club does not have a tools page that show the correct tools for each year. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

08-19-2014, 09:24 PM	#5
4dFord/SC Senior Member Join Date: May 2010 Location: Columbia, SC Posts: 1,579	Re: 1946 ford pickup jack and storage With all the different models, versions, changes, manufacturers, etc., over the years, it would be much more than just a page.

08-19-2014, 09:52 PM	#6
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: 1946 ford pickup jack and storage Sponsored Links (Register now to hide all advertisements) Well worth having the info out IMHO. The Model A jack page. All 10 jacks over 4 years, neatly done. http://www.mafca.com/tqa_jacks.html I realize that it would be 5 times as big for each tool, but very useful. Likely in the pile of 60+ jacks out at the farm I have some for various years, but can't find the info and hate to post pic's of that much stuff to ID. Just a thought. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!