1946 ford pickup jack and storage
 

does anyone have a pic of the correct jack and handle and where it was stored,unlike the 48 and up there is no room behind seat. on the 42-47 pu

Re: 1946 ford pickup jack and storage
 

I don't have the correct jack, haven't found one yet. I store the one I'll use, if need be, under the seat on the passenger side at the end of the gas tank. I suspect that is where the original went along with the crank handle/lug wrench and crank extension.

Re: 1946 ford pickup jack and storage
 

Try Lin Stacey, the EFV8 tool guru: [email protected].

Re: 1946 ford pickup jack and storage
 

I am really suprised that the flathead national club does not have a tools page that show the correct tools for each year. Rod

Re: 1946 ford pickup jack and storage
 

With all the different models, versions, changes, manufacturers, etc., over the years, it would be much more than just a page.

Re: 1946 ford pickup jack and storage
 

Well worth having the info out IMHO. The Model A jack page. All 10 jacks over 4 years, neatly done. http://www.mafca.com/tqa_jacks.html

I realize that it would be 5 times as big for each tool, but very useful. Likely in the pile of 60+ jacks out at the farm I have some for various years, but can't find the info and hate to post pic's of that much stuff to ID. Just a thought. Rod