The Ford Barn

INVISIBLEKID · 04-25-2013, 09:32 PM

Hey all- I DID the search thing,found a lot of usefull info,but would like some clarification.

.I'm using a 48 rear in my roadster,and have 19'' wheels. The 'hub" of the wheel rests nicelly agains the drum,and have plenty of threads to tighten,but is a spacer required as to not collapse the wheel? I also have early hubs in the front=37-40+,and want my spokes.
Solid wheels seem good to go(40 ford),but Q'ing the spokes because of the back of the wheel(lug/taper) in the hole.
Just do not want to find out the hard way!

.
Thanks if this has been re-visited over and over.
-Kid

04-25-2013, 09:32 PM	#1
INVISIBLEKID Member Join Date: Apr 2012 Location: Gilroy,CA Posts: 31	"A" wheels on a 48 rear? Hey all- I DID the search thing,found a lot of usefull info,but would like some clarification..I'm using a 48 rear in my roadster,and have 19'' wheels. The 'hub" of the wheel rests nicelly agains the drum,and have plenty of threads to tighten,but is a spacer required as to not collapse the wheel? I also have early hubs in the front=37-40+,and want my spokes. Solid wheels seem good to go(40 ford),but Q'ing the spokes because of the back of the wheel(lug/taper) in the hole. Just do not want to find out the hard way!. Thanks if this has been re-visited over and over. -Kid