Height adjustment

[J Franklin]

You could reverse a few of the spring leaves, or if the spring is sagging too much have it re-arched.

[bradtripp]

Originally Posted by J Franklin

You could reverse a few of the spring leaves, or if the spring is sagging too much have it re-arched.

would that account for it being low on just one side?

[bradtripp]

Originally Posted by bradtripp

would that account for it being low on just one side?

Or should I say Could that account?

[goodoldvic]

Hi try loosing the spring u bolts thru the frame and pushing up on the low side, with some force then retighten the u bolts. they lean like that sometimes cause only one rider has been in it.

[goodoldvic]

Push up on the body, on the door header that's what I've done in the past. You could pull the springs( use proper tool on rear) and re arc them. I did my front and it cured the lean, for a while anyhow