Spark and Gas Rod Colar

[Tom Wesenberg]

Originally Posted by JOES31

Tom

Is the part with the notches flat all the way down or is there a bow in it at the lower part. Mine is flat down to about 2/3 the way down then goes back about 3/16 to the bottom. It tends to make the lever snap down. is this the way it is supposed to be. It is fairly substantial so I can't see how or why anyone would have bent it.

Can the bottom of the lever that goes into the notches be sharpened a little.

The notched plates should be flat. Like Gar, I have also purchased new rods and found them to be excellent.