Need hinge screws

[D. Jones]

Originally Posted by ford3

im looking at mac,s catalog, they list them on page 190 v80006d, $2.50 per set`, 5/16"X1"x24 oval head 800 777 0984

Those are slotted head rather than phillips. They will certainly work, but I would prefer phillips heads as I feel I can torque them up tighter than the slotted. I may just see about using countersunk allen head machine screws if I can find them locally. In which case I will trade them all out so I don't have to change tools while installing or removing them.

Again, thanks for the input.

[B-O-B]

If you have an ACE HDWE or Lowes they have a section of special nuts/bolts & stuff. You might try there.