The Ford Barn

Racemo1 · 03-05-2014, 04:01 PM

Does anyone know the size of the terminal studs and their thread sizes? I believe there are two sizes on each coil, point mounting and vibrater adjustment. The closes that comes to fitting hardware mounting is a #10-44 tip.

Thanks

tmodelman · 03-05-2014, 08:32 PM

The 4 point mounting nuts are 12 X 32 the others are 10 X 32

CharlieB · 03-05-2014, 08:48 PM

Sponsored Links (Register now to hide all advertisements)

The 10-32's are common enough. I rebuild coils on a limited as I find 'em basis and the 2 odd ball nuts (if I need them) come in the coil nut kits sold by the big boys. Snyder's PN: T-5007-N $1.25 a set.

03-05-2014, 08:32 PM	#2
tmodelman Senior Member Join Date: May 2010 Posts: 580	Re: Ignition coil stud threads The 4 point mounting nuts are 12 X 32 the others are 10 X 32

03-05-2014, 08:48 PM	#3
CharlieB Senior Member Join Date: Sep 2010 Location: Toms River N.J. Posts: 515	Re: Ignition coil stud threads Sponsored Links (Register now to hide all advertisements) The 10-32's are common enough. I rebuild coils on a limited as I find 'em basis and the 2 odd ball nuts (if I need them) come in the coil nut kits sold by the big boys. Snyder's PN: T-5007-N $1.25 a set.

03-05-2014, 04:01 PM	#1
Racemo1 Junior Member Join Date: Mar 2012 Location: Dearborn Hts, MI Posts: 11	Ignition coil stud threads Does anyone know the size of the terminal studs and their thread sizes? I believe there are two sizes on each coil, point mounting and vibrater adjustment. The closes that comes to fitting hardware mounting is a #10-44 tip. Thanks