The Ford Barn - Ignition coil stud threads

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model T (1909-1927) (https://www.fordbarn.com/forum/forumdisplay.php?f=2)

- - Ignition coil stud threads (https://www.fordbarn.com/forum/showthread.php?t=133258)

Racemo1

03-05-2014 04:01 PM

Ignition coil stud threads

Does anyone know the size of the terminal studs and their thread sizes? I believe there are two sizes on each coil, point mounting and vibrater adjustment. The closes that comes to fitting hardware mounting is a #10-44 tip.

Thanks

tmodelman

03-05-2014 08:32 PM

Re: Ignition coil stud threads

The 4 point mounting nuts are 12 X 32 the others are 10 X 32

CharlieB

03-05-2014 08:48 PM

Re: Ignition coil stud threads

The 10-32's are common enough. I rebuild coils on a limited as I find 'em basis and the 2 odd ball nuts (if I need them) come in the coil nut kits sold by the big boys. Snyder's PN: T-5007-N $1.25 a set.

All times are GMT -5. The time now is 03:57 AM.