Help I’d these parts

[1930artdeco]

I am helping a coworker clean out his father’s garage of T/A/V8 parts. I am salvaging what I can and what I think people can use. I think I pretty much skipped over all of the T parts but some may have gotten mixed in. But I am not sure what these go to. Everything will go bye bye to other people for either free ( just pay for shipping) or a very reasonable price. I want the stuff gone. So please tell me what these go to so I can mark them appropriately.

Just a cursory inventory: I have new and used pistons, rods, lots of bearings, wheel, steering, axle. I think I even have some shade rods/springs for a closed T car.

Thanks,

Mike

[Y-Blockhead]

Picture #4 is an axle and #5 is a radiator apron.

[30Murray]

How many teeth on that axle? If 24 its Model A.

[1930artdeco]

Thanks, Murray. I will check as they look so similar.

[Marshall V. Daut]

#3 looks like the curved inner panel that connects the trunk/rumble seat platform to the outer rear panel below the decklid in a roadster, Cabriolet or coupe of some flavor. 'Can't tell from the photo whether it's for a trunk or for a rumble seat.
Marshall

[marko39]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by 30Murray

How many teeth on that axle? If 24 its Model A.

the green bible may help id the axle

[katy]

If the gear is a separate piece from the axle, it's Model T. The gear is pressed on, a C clip retainer is placed in the groove, and the gear is pressed back over the C clip retainer.

[1930artdeco]

I don't think the gear is pressed on but I will look closer today. Have to load the car for the national and then leave tomorrow!!!!


Mike

[katy]

Hope this helps:

[stevests]

Model T axle.

[1930artdeco]

I looked and don’t remember seeing a ring like that Katy. And I counted 24 teeth so hoping I got a good spare axle.