|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
05-28-2025, 03:58 PM
|
#8 |
|
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 6,857
|
Re: Mitchell over drive questions
Mitchell is very helpful. They will answer all your questions.
My Mitchell overdrive needs topping up every few months. I am not sure were the oil goes, maybe to the rear end. Although Mitchell says to use the G5 rated gear oil, I believe the G4 rated gear oil is a better choice because of the brass components in the overdrive. Brass components can chip off with G5 because the additives are too aggressive. Make sure it is the 85W-140 grade gear oil. Do not try to baby the overdrive. Put the clutch in and shift quickly. That is better for the synchromesh components.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 05:51 PM.