The Ford Barn

BRENT in 10-uh-C · 04-10-2025, 09:09 AM

Quote:

Originally Posted by 50Trucking

Install larger valves, turn down the flywheel to receive V8 clutch, Deck the block and balance the assembly. This is a model a 4 banger block

Can I make a suggestion? IMHO you really need to find a machine shop that specializes in vintage engines (-in other words that is all they do), ...and more specifically ones that specialize in Model-A/B engines. If all they are doing is what you have suggested above, then box or palletize the rotating assembly and the block and ship it to whatever shop you find.

50Trucking · 04-12-2025, 05:51 AM

Ten u C, Do you know of one?

Chris in WNC · 04-12-2025, 11:42 AM

check with James Rogers in Leicester, NC.

BRENT in 10-uh-C · 04-12-2025, 06:11 PM

Please delete as this was inadvertently posted as a duplicate

04-12-2025, 05:51 AM	#2
50Trucking Member Join Date: Sep 2020 Location: St Augustine Fl Posts: 56	Re: Need a machine shop in Northeast Florida Ten u C, Do you know of one?

04-12-2025, 11:42 AM	#3
Chris in WNC Senior Member Join Date: May 2010 Location: Spruce Pine, NC Posts: 1,498	Re: Need a machine shop in Northeast Florida check with James Rogers in Leicester, NC. __________________ our next Model A has arrived.....

04-12-2025, 06:11 PM	#4
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,971	Re: Need a machine shop in Northeast Florida Please delete as this was inadvertently posted as a duplicate __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) . Last edited by BRENT in 10-uh-C; 04-12-2025 at 07:14 PM.