Windshield Hold Open Hardware

[ModelA29]

Originally Posted by Dick M

Post #5 looks correct to me and that is how I have it configured on my A. It only makes sense that the spring washer would be between the big nut and the steel/rubber washer to hold the nut tight..

The wave washer goes where the swing arm attaches to the windshield frame. It's there to stop rattles not as a lock washer. I don't think the lock washer shown there on the oval head screw (message 9) should be there as that is a rotating point and the screw should just bottom out in the frame leaving it free to rotate.

There shouldn't be a need for a lock washer between the thumb nut and steel/rubber washer.