Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-21-2024, 03:38 PM   #1
slowforty
Senior Member
 
slowforty's Avatar
 
Join Date: May 2010
Location: Tinley Park Ill
Posts: 1,176
Default Dont wait until it is too late

With the recent Passing of some of the Barn members. I think that we should compliment the members who have helped us along the way,while they are still here. And able to enjoy your thoughts
slowforty is offline   Reply With Quote
Old 10-21-2024, 07:23 PM   #2
JayChicago
Senior Member
 
JayChicago's Avatar
 
Join Date: Jan 2019
Location: Chicago
Posts: 926
Default Re: Dont wait until it is too late

Knew nothing about flatheads when I got my first a few years ago. Learned at the feet of the experts here, and on the V8 Club forum. Not going to try to call them out by name; sure to overlook someone. You experts know who you are.

I am so grateful that you share your knowledge!
JayChicago is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-21-2024, 07:59 PM   #3
ford38v8
Senior Member
 
ford38v8's Avatar
 
Join Date: Jul 2011
Location: SF Bay Area
Posts: 7,283
Default Re: Dont wait until it is too late

All true, but I have a different take on the whole thing. I found that Ford guys and gals, specifically flathead people, are a cut above most anyone I ever knew in the way of just being good folks. The best cars brought us all together, but it’s the people that keep us together.
__________________
Alan
ford38v8 is offline   Reply With Quote
Old 10-22-2024, 08:46 AM   #4
19Fordy
Senior Member
 
19Fordy's Avatar
 
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,604
Default Re: Dont wait until it is too late

I have found that the Fordbarn folks do really appreciate the willingness to share knowledge and help each other out.
19Fordy is offline   Reply With Quote
Old 10-22-2024, 04:41 PM   #5
coolcoupe
Senior Member
 
coolcoupe's Avatar
 
Join Date: May 2010
Location: ontario,Canada
Posts: 517
Default Re: Dont wait until it is too late

I don't know what I would have done with my car without all the help that I've received threw out the years. I have got so much advice and some much needed parts over the years. All I can say, a big thank you to all the people that help me !!!
coolcoupe is offline   Reply With Quote
Old 10-22-2024, 06:40 PM   #6
RKS.PA
Senior Member
 
RKS.PA's Avatar
 
Join Date: Jun 2010
Location: Oro Valley, AZ
Posts: 1,241
Default Re: Dont wait until it is too late

Sponsored Links (Register now to hide all advertisements)
Same goes for me these last 14 years!! In addition to the help here online, the "specialists"...eg. Charlie NY, Bubba, Sal, Skip Haney, Mike, Denny, Dickie, Mac VP, etc. saved my bacon!!! Would have been lost without you all!!! Thank you all very much!!!
RKS.PA is offline   Reply With Quote
Old 10-22-2024, 07:45 PM   #7
busmania
Senior Member
 
busmania's Avatar
 
Join Date: Oct 2022
Location: Denver metro
Posts: 513
Default Re: Dont wait until it is too late

I knew nothing of flatheads 2 years ago when I bought my 40.Coming from vw’s and a little bit of Chevy small block, I didn’t even know what flathead meant or was. Because of the barn I feel like an expert now (but I’m far from it). As a reader of multiple forums of various car types, it’s nice that all the “old timers” aren’t just here telling people to “use the search” and whatever else. The willingness to answer questions (that I’m sure have been asked a million times) has helped me and my build so much. Thank you everyone!
__________________
40 ford coupe Build -https://www.jalopyjournal.com/forum/...coupe.1277406/
busmania is offline   Reply With Quote
Old 10-22-2024, 10:57 PM   #8
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 2,909
Default Re: Dont wait until it is too late

At a Western National, I shared a dinner table with a V8 Foundation employee. So now my V8 estate goes entirely to the Foundation, all spelled out in my trust. Big job for them, but my relatives don't care a whit. Newc
Newc is offline   Reply With Quote
Old 10-23-2024, 02:56 PM   #9
1942deluxe
Senior Member
 
1942deluxe's Avatar
 
Join Date: Jan 2011
Location: Albion, PA
Posts: 986
Default Re: Dont wait until it is too late

cathy.jpg
Chris (Sugarmaker) on here has become like an older brother to me. The 1942 Ford would have never got this far without his help and a very valuable friendship. Charlie Schwendler has also been a huge asset and friend along with many others on this sight. I have to give a shout out to the wives too. For 43 years Cathy has found ways to help me make things happen even in times when our bucks were really tight. She's helped me clean, hold the light, even install ignition wires in the conduits. She's been my "believer". I caught lighting in a bottle the day I found her.
1942deluxe is offline   Reply With Quote
Old 10-23-2024, 03:01 PM   #10
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,917
Default Re: Dont wait until it is too late

Quote:
Originally Posted by 1942deluxe View Post
Attachment 553916
Chris (Sugarmaker) on here has become like an older brother to me. The 1942 Ford would have never got this far without his help and a very valuable friendship. Charlie Schwendler has also been a huge asset and friend along with many others on this sight. I have to give a shout out to the wives too. For 43 years Cathy has found ways to help me make things happen even in times when our bucks were really tight. She's helped me clean, hold the light, even install ignition wires in the conduits. She's been my "believer". I caught lighting in a bottle the day I found her.
Damn, ain't that the truth. Friends are certainly great and needed, but a good, supportive woman is simply priceless.

Last edited by Tim Ayers; 10-24-2024 at 05:49 AM.
Tim Ayers is offline   Reply With Quote
Old 10-23-2024, 04:07 PM   #11
flatford8
Senior Member
 
flatford8's Avatar
 
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,889
Default Re: Dont wait until it is too late

Well said men…(John & Tim)……Mark
__________________
I'm thinkin' about crankin'
My ragged ol' truck up
and haulin' myself into town.
Billy Joe Shaver…RIP
flatford8 is offline   Reply With Quote
Old 10-25-2024, 08:28 AM   #12
Scott52
Senior Member
 
Join Date: Feb 2020
Posts: 194
Default Re: Dont wait until it is too late

Yes! I have been a contributor to a minor extent on the Power Wagon and Tri 5 Chevy sites. I am still learning the flatheads. The problem is, I am forgetting what I actually did. Lots of pictures and notes. I even searched a topic on this site and discovered I had asked the question 1 year before. Tough to give advice when the memory is slipping. The guys that really know are a blessing. Shout out to all of them.
Scott52 is offline   Reply With Quote
Old 10-25-2024, 11:14 AM   #13
APDAVE
Senior Member
 
Join Date: Jun 2010
Posts: 238
Default Re: Dont wait until it is too late

Thanks Guys for all of your wisdom! Dave
APDAVE is offline   Reply With Quote
Old 10-25-2024, 08:11 PM   #14
Gene1949
Senior Member
 
Gene1949's Avatar
 
Join Date: Jun 2016
Location: Pahrump, NV
Posts: 457
Default Re: Dont wait until it is too late

Most of us are on the wrong side of 80, just a fact of life guys. The members of this board have helped me so much even though I’m “one of them” (not a purist).
I'm very concerned about what's going to happen to our cars when we all pass. In my case it goes to my daughter because she has always wanted that car and drove it when she was in high school.
The kid that grew up in my shop is retiring out of his own diesel and automotive business. When he retires I'm not sure what's gonna happen as far as maintenance when my daughter gets the car.
The only thing that I've been able to think of is excellent record keeping as far as the conversions, fluids and so on; 12 Volt, electronic ignition, electric fuel pumps, stereo, electric fans etc. A “so-called” tech might be able to figure it out. In my records is the URL of this board. Hopefully there will be some younger members who will point her in the right direction
I really don't know what the purists are gonna do when their time comes. Their cars are going to be a real bear to maintain.
Gene1949 is offline   Reply With Quote
Old 10-26-2024, 06:01 AM   #15
32Bee
Senior Member
 
Join Date: May 2010
Location: Stratham, NH
Posts: 272
Default Re: Dont wait until it is too late

Don't forget David Rehor. When I bought my 32 5Win in 1981 and decided to restore it,
he and I corresponded by snail mail throughout the process. If it weren't for him my coupe would have never been correctly restored. His knowledge of 32 Fords is second
to no one. Thanks for all of your knowledge and expertise. My hat is also off to everyone
else on the Barn that continue to offer advice.

Peter
32Bee is offline   Reply With Quote
Old 10-26-2024, 09:50 AM   #16
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 11,633
Default Re: Dont wait until it is too late

I'll add that I was amazed when I realized that such known experts as David, Mike Kubarth, and authors like "Ol' Ron were active contributors here. Back when I first joined, we also had John Lawson and Walt DuPont. There are also the repair experts, like "32Phil", "scicala", "ndnchf" and the guy who makes the truck sheet metal (sorry, can't remember the handle) who are resources that are invaluable. I just wish Charlie in New York were included.

All in all, we have a tremendous resource in this forum.
tubman is offline   Reply With Quote
Old 10-27-2024, 07:54 AM   #17
38 coupe
Senior Member
 
38 coupe's Avatar
 
Join Date: May 2010
Location: South Texas
Posts: 2,040
Default Re: Dont wait until it is too late

In addition to the great members on this forum I also greatly appreciate the V8 Club advisors, particularly those who wrote books on their specific years of knowledge. We are truly lucky that some of those advisors like David Rehor, David Gunnarson, and Mike Kubarth are also on this forum. As one of the few on this forum on the short side of 50 I am somewhat apprehensive about the future of the V8 hobby, but that is a topic for a different thread.
38 coupe is offline   Reply With Quote
Old 10-27-2024, 05:58 PM   #18
oldbugger
Senior Member
 
oldbugger's Avatar
 
Join Date: May 2010
Location: Holland Mi
Posts: 705
Default Re: Dont wait until it is too late

I must mention 'flathead Fan" I know his health is poor and has not been contributing much here anymore, but he has been a mentor for me. years ago i saw his 35 at a local car show and he spent a lot of time with me showing his work. that prompted me to work on the 35 that my dad got after WW2. it was all in boxes and totally disassembled. with his help, and others on this site I was able to get it done. He has truly been an inspiration for me. Thanks to all
oldbugger is offline   Reply With Quote
Old 10-29-2024, 12:14 PM   #19
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,917
Default Re: Dont wait until it is too late

Quote:
Originally Posted by 38 coupe View Post
In addition to the great members on this forum I also greatly appreciate the V8 Club advisors, particularly those who wrote books on their specific years of knowledge. We are truly lucky that some of those advisors like David Rehor, David Gunnarson, and Mike Kubarth are also on this forum. As one of the few on this forum on the short side of 50 I am somewhat apprehensive about the future of the V8 hobby, but that is a topic for a different thread.
I would also like to thank all of those who post and add their wisdom daily/regularly. Along with all the great members who have been mentioned already, I would also like to acknowledge RonnieRoadster in CT, Jim in FL (19Forty), Dale in OH (Bored&Stroked) and (RIP) V8Coopman. I'm sure the more I think about it, I'll add more to this list.

I'm another one here on the short side of 50. In December, I'll have a year to go before I retire. Can't wait to have more time to work on old Fords.

After attending TROG a few weeks back, I can report the hobby is alive and kicking. May have changed a bit and the end goals may not align to some, but the interest in old Fords is stronger than ever in my opinion.

What I think is cool is it seems like more folks are driving their old Fords. They are not waiting until they are restored. They are loving them as they.

Last edited by Tim Ayers; 10-29-2024 at 05:09 PM.
Tim Ayers is offline   Reply With Quote
Old 10-29-2024, 01:12 PM   #20
Detonator
Senior Member
 
Detonator's Avatar
 
Join Date: May 2010
Location: Santa Cruz
Posts: 395
Default Re: Dont wait until it is too late

I'm 76, been here 14 years, and still feel like a little kid sitting at the feet of giants. Thank you all.
__________________
Seabright Hot Rods
Detonator is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:10 AM.