Front wheel studs

[30Murray]

I have what appear to be 1940-48 style front brakes with hubs on the outside of the drums, which I believe are original style. I bought these used for my Model A so I don't know the exact year. One of the wheel studs became loose and had to be drilled out and replaced so I bought a #51A-1107 stud from Ecklers (.62" shoulder x 1.52" long). The problem is, the stud is too short, both overall length and shoulder so it can't be swedged. I can't seem to find any vendors with longer studs. I could weld the head but the overall length is still a little short. Has anyone had this problem and found a solution?