The Ford Barn

john charlton · 06-14-2023, 10:04 AM

Yes I see when both surfaces are machined the same everything is back to standard spec .

John as before .

JayJay · 06-14-2023, 10:14 AM

My memory, faulty as it is, says that the proper difference between flywheel face and the ring with the bolt holes is 1-1/8” (1.125”)???

JayJay

06-14-2023, 10:04 AM	#1
john charlton Senior Member Join Date: May 2010 Posts: 1,343	Re: Clutch cover question. Yes I see when both surfaces are machined the same everything is back to standard spec . John as before .

06-14-2023, 10:14 AM	#2
JayJay Senior Member Join Date: Jan 2020 Location: SF Bay Area Posts: 2,101	Re: Clutch cover question. My memory, faulty as it is, says that the proper difference between flywheel face and the ring with the bolt holes is 1-1/8” (1.125”)??? JayJay __________________ JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan It isn't a defect, it's a feature!