Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)
Reload this Page Need some '35 floorboard seal insight

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-27-2021, 06:43 PM   #11
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,876
Default Re: Need some '35 floorboard seal insight
Quote:
Originally Posted by Don Rogers View Post
John, I believe that the steel floor board also used anti-squeak material. They used rivets instead of staples to hold on the material. Those rivets are still evident in the enclosed backside view of the steel board.

Don, thanks for the clarification on this. I'll check that sheet metal toe board to see if I can find any remnants of the anti-squeak material, possibly still attached at those rivets.
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
JM 35 Sedan is offline   Reply With Quote
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:38 PM.