|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
07-30-2021, 05:04 PM
|
#2 |
|
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 5,855
|
Re: Stock Ride Height
Hi Mark,
Les Andrews' book "Model A Ford Mechanics Handbook Vol. I" says 18-11/16 +/- 1/2 inch to the CENTER of the front bumper to ground for a 1928 or 29 and 18-1/2 +/- 1/2 for a 1930 or 31. Measure with tires fully inflated to 35 psi. He does not give a similar measurement for the rear. Differences in tire size from different manufactures can change the heights.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 12:02 AM.