The Ford Barn

Black Fifty · 09-22-2020, 06:01 PM

You might get more responses if you remind people what model you have. In a previous post, you mentioned that it is a 33 Tudor, but worth mentioning again.

I'm not familiar with these cars so I can't answer your question. Hopefully, some of the guys that know these cars well will chime in.

Don't know if this helps.
https://www.jalopyjournal.com/forum/...sedan.1135507/
Good Luck!
Mike

jgonz0010 · 09-22-2020, 11:12 PM

I cant be certain but it seems based on some pictures from the parts manual (notably for a vehicle that is not the same as yours) that the bolt would go through frame and tank. The bushing would go next followed by the washer and then the nut.

09-22-2020, 06:01 PM	#1
Black Fifty Senior Member Join Date: Oct 2018 Location: The Thumb of Michigan Posts: 107	Re: Gas tank mounting conundrum You might get more responses if you remind people what model you have. In a previous post, you mentioned that it is a 33 Tudor, but worth mentioning again. I'm not familiar with these cars so I can't answer your question. Hopefully, some of the guys that know these cars well will chime in. Don't know if this helps. https://www.jalopyjournal.com/forum/...sedan.1135507/ Good Luck! Mike Last edited by Black Fifty; 09-22-2020 at 06:29 PM. Reason: added information

09-22-2020, 11:12 PM	#2
jgonz0010 Junior Member Join Date: Sep 2020 Posts: 1	Re: Gas tank mounting conundrum I cant be certain but it seems based on some pictures from the parts manual (notably for a vehicle that is not the same as yours) that the bolt would go through frame and tank. The bushing would go next followed by the washer and then the nut.