Timed my roadster - now runs worse

[40 Deluxe]

Originally Posted by updraught

If it's an old engine with low compression, say 50 psi or so then it may need to be advanced to give it some zip and zing on todays fuels. Maybe that is what the previous owner did.
Good to know how much compression you have anyway.

Since the timing lever gives a total of 40 deg. advance when fully down, there would be no need to mess with the setting of the distributor cam! 40 deg. is more than enough advance, even for a worn engine.

[updraught]

Originally Posted by 40 Deluxe

Since the timing lever gives a total of 40 deg. advance when fully down, there would be no need to mess with the setting of the distributor cam! 40 deg. is more than enough advance, even for a worn engine.

Well, maybe it is not advancing 40 degrees then. If it is noisier than previously, it is retarded compared to what it was.