|
|
04-30-2020, 04:29 PM
|
#1 |
|
Member
Join Date: Dec 2015
Location: Brooklyn Michigan
Posts: 53
|
Re: Hinge Pins
Thanks for the info. Ground off top of pin and drilled about half way down pin with a 1/8" drill and punched it out the bottom. Not too bad
|
|
|
 |
«
Previous Thread
|
Next Thread
»
Hybrid Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 03:54 PM.