|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-04-2018, 04:24 PM | #1 |
Junior Member
Join Date: Jul 2015
Posts: 10
|
1931 Model Victoria installation of the double arm regulator
How do you install the double arm regulator in the door. I needed to shem the glass channel so the window did not jam. was able to get everything out and cleaned up but I am having problems getting the regulator back in with the arms in the slide mechanism. Any advice would be hepful.
|
06-04-2018, 05:29 PM | #2 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,379
|
Re: 1931 Model Victoria installation of the double arm regulator
I have a good article from The Bustle and will share tomorrow when I get to my desktop computer
I think I have posted here before but will again BTW would be a good idea to be a memeber if you're not already Last edited by Oldbluoval; 06-04-2018 at 05:31 PM. Reason: Additional info |
Sponsored Links (Register now to hide all advertisements) |
|
06-05-2018, 08:04 AM | #3 |
Member
Join Date: Jan 2018
Posts: 54
|
Re: 1931 Model Victoria installation of the double arm regulator
What does "BTW" stand for? Thank you.
|
06-05-2018, 08:43 AM | #4 |
Senior Member
Join Date: May 2010
Location: La Mesa Ca
Posts: 1,172
|
Re: 1931 Model Victoria installation of the double arm regulator
By The Way
|
06-05-2018, 08:31 PM | #5 |
Junior Member
Join Date: Jul 2015
Posts: 10
|
Re: 1931 Model Victoria installation of the double arm regulator
Did you ever find that article on the installation steps for the regulator
|
06-05-2018, 09:53 PM | #6 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 3,134
|
Re: 1931 Model Victoria installation of the double arm regulator
Sponsored Links (Register now to hide all advertisements)
You are invited and encouraged to join the Victoria association. Go on line to their web site and download an application. Tom Endy |
06-06-2018, 09:16 AM | #7 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,379
|
Re: 1931 Model Victoria installation of the double arm regulator
Lets see if this uploads! This one of the most accurate and inclusive article I've seen on most ANY subject.
Seems to have worked! Last edited by Oldbluoval; 06-06-2018 at 09:25 AM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|