1931 Model Victoria installation of the double arm regulator
 

How do you install the double arm regulator in the door. I needed to shem the glass channel so the window did not jam. was able to get everything out and cleaned up but I am having problems getting the regulator back in with the arms in the slide mechanism. Any advice would be hepful.

Re: 1931 Model Victoria installation of the double arm regulator
 

I have a good article from The Bustle and will share tomorrow when I get to my desktop computer
I think I have posted here before but will again

BTW would be a good idea to be a memeber if you're not already

Re: 1931 Model Victoria installation of the double arm regulator
 

What does "BTW" stand for? Thank you.

Re: 1931 Model Victoria installation of the double arm regulator
 

By The Way

Re: 1931 Model Victoria installation of the double arm regulator
 

Did you ever find that article on the installation steps for the regulator

Re: 1931 Model Victoria installation of the double arm regulator
 

There are several articles about Victoria doors\windows that have appeared in the Victoria Association newsletters and the technical book they sell. Attached is one of the articles that may be of help.


You are invited and encouraged to join the Victoria association. Go on line to their web site and download an application.


Tom Endy

Re: 1931 Model Victoria installation of the double arm regulator
 

Lets see if this uploads! This one of the most accurate and inclusive article I've seen on most ANY subject.


Seems to have worked!