Oil pickup tube for a French block?

[Bored&Stroked]

Sponsored Links (Register now to hide all advertisements)

I'd use a 49-53 oil pump and a truck pickup. I used to just bend/weld up other flathead pickups to get them to the right spot - not I just buy this one from Speedway:

https://www.speedwaymotors.com/Speed...Tube,4289.html

Sometimes the pickup bottom is TOO far off the bottom of the pan - should be between 1/4" and 3/8" - I've had to heat and bend some of them.

Good luck!
B&S