The Ford Barn

Tom Wesenberg · 01-06-2015, 07:43 PM

This is probably common knowledge, but I always use an awl to poke the holes for the rivets. I do the same for the 3 cowl screws and 4 clip rivets.

C26Pinelake · 01-09-2015, 04:39 AM

Quote:

Originally Posted by Tom Wesenberg

This is probably common knowledge, but I always use an awl to poke the holes for the rivets. I do the same for the 3 cowl screws and 4 clip rivets.

Very sound advice as usual and as above please don't use glue.
Wayne

01-06-2015, 07:43 PM	#1
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: radiator shell lacing please advise This is probably common knowledge, but I always use an awl to poke the holes for the rivets. I do the same for the 3 cowl screws and 4 clip rivets.