radiator shell lacing please advise

[hardtimes]

Hey Fred,
If working with avatar coupe, i.e.- '30/'31 the radiator shell 'lacing' is held on with four flathead screws, in addition to the split rivits.
Glue is a joke right, I get it

[Mitch//pa]

when you order the split rivets from snyders get the split rivet tool also.. its cheap,, sets the rivets properly,,, works great.

[fredski]

Originally Posted by hardtimes

Hey Fred,
If working with avatar coupe, i.e.- '30/'31 the radiator shell 'lacing' is held on with four flathead screws, in addition to the split rivits.
Glue is a joke right, I get it

my avatar is my 1930 town sedan with the doors off as at that time
I was installing head liner and new roof top.

glue was not a joke , but just an option I was considering.

I will get proper rivets as most suggest.

thankyou

[ian Simpson]

Originally Posted by Don Turley

Original Model A radiator shell lacing was not held on with any type of screws; only with rivets. Please explain the location of these "four flathead screws".

On my 1928 Tudor, the lacing on the cowl is held on by two lengths of wire held by four flat head screws. The radiator shell lacing is held by split rivets.

Ian

[Mike V. Florida]

Originally Posted by Don Turley

Original Model A radiator shell lacing was not held on with any type of screws; only with rivets. Please explain the location of these "four flathead screws".

I think he is talking about the shell to radiator screws that go under the lacing.

[Mike V. Florida]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Don Turley

But that is not what "hardtimes" said. And, even those are not "flathead" screws, which are intended to go into a tapered hole.

"Ford Model A Hardware" book, published by MARC & MAFCA shows those as "Special Flat Head Slotted Bolt, part number A20401, No.12-24 USF x 1/2" long". The closest thing that is being manufactured today is a "pan-head screw". The surface that goes against the metal is flat, not tapered.

These special bolts that attach the radiator shell to the radiator do not go through the lacing. The lacing goes over the heads of the bolts.

He doesn't have the restoration manual or the hardware book. To the average guy they are flat head screws and you have to admit they do look like the screw should go through the lacing. I offered to buy from him the Restoration guidelines and judging manual if he felt it was not worth the money, but have not heard back.