|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: May 2010
Location: Indiana
Posts: 23
|
![]()
Hello,
I have a line-bore machine , but need the jig used to align the boring bar in newly poured babbitt in the mains in Model A and B Fords, the machine that I have is a Serv-Equip {looks like a van-norman LB3200} I think the alignment jigs from a Tobin-Arp machine will work .These jigs fit into the cam bearing hole and rest on the oil pan rail, leaving a hole to place the boring bar in , or to indicate off of thanks for looking JIMI |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Oct 2011
Posts: 37
|
![]()
I have a pair for sale that were froma Tobin Arp line bore with a 1.125" hole for the bar.
Send me a pm with your details and I will be in touch. M |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Junior Member
Join Date: May 2010
Location: Indiana
Posts: 23
|
![]() Sponsored Links (Register now to hide all advertisements)
JIMI |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|