The Ford Barn

wa4ko · 05-10-2010, 10:03 AM

Does anyone know where I could get a right hand double ( for cross steer )
steering arm that will fit a standard 1932 axle?
Thanks
Larry

hotcoupe · 05-10-2010, 10:20 AM

`37-`41 (round back) or `42-`48 (square back).

wa4ko · 05-10-2010, 11:55 AM

Not sure, would like to use 1928-34 Ford Cross Steer Rack and Pinion and they
told me I would have to find a right side double steering arm for the car. The
older cars did not have a double for steering rod and for tie rod to be able to
both attach??
Larry

Andy · 05-10-2010, 12:43 PM

Sponsored Links (Register now to hide all advertisements)

I think you should join the HAMB. A lot of info over there. The rack and pinion is not the best idea. Do a search. You can use a tie rod end that has a bung for the cross steer. The rack and pinion steering results in a very wide turning radius. A Vega or a 37-48 Ford box would be vastly better.

05-10-2010, 10:03 AM	#1
wa4ko Member Join Date: May 2010 Location: Okeechobee, FL Posts: 41	1932 steering arms Does anyone know where I could get a right hand double ( for cross steer ) steering arm that will fit a standard 1932 axle? Thanks Larry

05-10-2010, 10:20 AM	#2
hotcoupe Senior Member Join Date: May 2010 Location: imperial,mo Posts: 701	Re: 1932 steering arms `37-`41 (round back) or `42-`48 (square back).

05-10-2010, 11:55 AM	#3
wa4ko Member Join Date: May 2010 Location: Okeechobee, FL Posts: 41	Re: 1932 steering arms Not sure, would like to use 1928-34 Ford Cross Steer Rack and Pinion and they told me I would have to find a right side double steering arm for the car. The older cars did not have a double for steering rod and for tie rod to be able to both attach?? Larry

05-10-2010, 12:43 PM	#4
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,778	Re: 1932 steering arms Sponsored Links (Register now to hide all advertisements) I think you should join the HAMB. A lot of info over there. The rack and pinion is not the best idea. Do a search. You can use a tie rod end that has a bung for the cross steer. The rack and pinion steering results in a very wide turning radius. A Vega or a 37-48 Ford box would be vastly better.