Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-16-2012, 06:15 PM   #1
marty in Ohio
Senior Member
 
marty in Ohio's Avatar
 
Join Date: May 2011
Location: Elyria, Ohio
Posts: 806
Default Timing problem?

Hey, Barners,
Last week my "30 Town Sedan came home on a flatbed. It would crank, lots of gas but no start. After a trip to Snyders it now has a new coil. condenser, points, rotor, dist. body and cap. It still wouldn't run till I changed the ignition switch. Had it out today and it ran OK but a little rough. I started her to bring her home from a trip to Home Depot and she acted like it was running out of gas. She finally stalled. I got her running but she wouldn't take an advanced spark, only retarded. I got a short distance and again had to come home on the flatbed. My local Model A friend thought it was a gas issue, so I checked out the gasline, lots of flow to the carb. I took off the carb , a new Zenith a year ago, and everything there looks OK. I checked the timing and looks OK. I got her to run in the garage a little but only with the spark retarded. When I advanced the lever she died. Please help with any suggestions. I'm beginning to know the towtruck driver on a first name basis.
Marty in Ohio
marty in Ohio is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:59 PM.