|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Feb 2012
Location: Brighton, Ontario
Posts: 5
|
![]()
Les Andrews in his Mechanics Handbook (page 2-19) states that toe-in should be 3/16" +- 1/16 while in his Troubleshooting and Diagnostic (page 5-19) he says it should be 1/16" +- 1/32. Which is correct and does anyone have any further thoughts on this subject ?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,841
|
![]()
It was originally 3/16 and then Ford changed it to 1/16 +- 1/32.
Bob |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Cape Cod
Posts: 1,128
|
![]()
Jack,
I started a note on this subject back a couple of months. The answer to your question is that Ford changed the toe-in from 3/16 to 1/16 during the Model A time. I set my car to 1/16 and it made a nice improvement. Marc |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Naperville, IL
Posts: 1,387
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|