![]() |
#1 |
Senior Member
Join Date: May 2010
Posts: 226
|
![]() City:
Western
State:
ky
Price:
30.00
Pair of Outer Tie Rod Ends, one RH and one LH. These are New Old Replacement Stock and never used. Do not get these confused with the cheap reproductions that are made outside the US. These were made in the USA. Do not trust your steering parts that were made overseas with inferior metal. These were made in the USA and are stamped on the back “MADE IN THE USA. Shipping $6.50. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,862
|
![]()
Where are the threaded holes for the zerk fittings located on these tie rod ends? On center of bottom/flat area or on the side?
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,862
|
![]() Sponsored Links (Register now to hide all advertisements)
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|