The Ford Barn

35fordtn · 10-12-2025, 10:28 AM

Guys I need help!
I am going through all my stainless trim and ID'ing it all (what a freaking task this has been).
I was hoping someone could help me with the lengths of the sides and small bar stainless trim on a 1939 Deluxe grille. Same for standard

Juergen · 10-13-2025, 09:05 AM

For a 39 standard;
the top one (on the bottom of the side panel) is 14 3/8 inches
the middle one is 9 inches
the bottom is 7 1/2 inches

Brian · 10-13-2025, 10:07 PM

My 39 Deluxe stainless measures as follows....from centre outward, 17 9/16", 17 3/4", 17 15/16", 18", 18 3/16", 18 5/16', 18 5/8", 18 7/8", 19", 9 1/2", 4". The outermost strips measure 22 1/8"

35fordtn · 10-14-2025, 07:29 PM

Thanks Guys!

Lawrie · 10-16-2025, 02:55 AM

Brian, you home tomorrow
Lawrie

Brian · 10-16-2025, 12:21 PM

Sponsored Links (Register now to hide all advertisements)

yes Lawrie, looking forward to having a catch up

10-12-2025, 10:28 AM	#1
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,468	1939 Deluxe grille stainless dimensions Guys I need help! I am going through all my stainless trim and ID'ing it all (what a freaking task this has been). I was hoping someone could help me with the lengths of the sides and small bar stainless trim on a 1939 Deluxe grille. Same for standard Last edited by 35fordtn; 10-12-2025 at 11:50 AM.

10-13-2025, 09:05 AM	#2
Juergen Senior Member Join Date: May 2010 Posts: 536	Re: 1939 Deluxe grille stainless dimensions For a 39 standard; the top one (on the bottom of the side panel) is 14 3/8 inches the middle one is 9 inches the bottom is 7 1/2 inches

10-13-2025, 10:07 PM	#3
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 4,096	Re: 1939 Deluxe grille stainless dimensions My 39 Deluxe stainless measures as follows....from centre outward, 17 9/16", 17 3/4", 17 15/16", 18", 18 3/16", 18 5/16', 18 5/8", 18 7/8", 19", 9 1/2", 4". The outermost strips measure 22 1/8" __________________ Unfortunately, two half wits don't make a whole wit!

10-14-2025, 07:29 PM	#4
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,468	Re: 1939 Deluxe grille stainless dimensions Thanks Guys!

10-16-2025, 02:55 AM	#5
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,728	Re: 1939 Deluxe grille stainless dimensions Brian, you home tomorrow Lawrie

10-16-2025, 12:21 PM	#6
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 4,096	Re: 1939 Deluxe grille stainless dimensions Sponsored Links (Register now to hide all advertisements) yes Lawrie, looking forward to having a catch up __________________ Unfortunately, two half wits don't make a whole wit!