Ted’s brake floaters

[john greco]

Can anyone tell me where you can buy a set of teds brake floaters , Mac’s / ecklers discontined. , thanks John.

[john greco]

Need for a 36

[jimTN]

http://flatheadted.com/

[azlkk]

I had to call him in New Zealand, actually his son I believe, when emails didn’t work. From there emailing worked and received my kit in the mail in around a week. Cost was less than the webpage to for my 1935 kit.

[A bones]

How about sharing that phone number?

[KiWinUS]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by A bones

How about sharing that phone number?

It’s on his website

[azlkk]

I used the International number (+6496263141) when emails didn't work.

From then email started working ([email protected]).

[john greco]

Called and paid thru PayPal today , let’s see how long it takes

[A bones]

Originally Posted by KiWinUS

It’s on his website

Not a secure site Misses has this device wired to finance sites.

[A bones]

Originally Posted by azlkk

I used the International number (+6496263141) when emails didn't work.

From then email started working ([email protected]).

Thank You very much

[mercman from oz]

Instructions - Fitting Ted''s Floaters.

[KiWinUS]

Originally Posted by A bones

Not a secure site Misses has this device wired to finance sites.

I certainly did not have that issue.

Tried again and definitely a secure website and has ph #.
All seems grand for me.

[Yoyodyne]

Do these work on a 36? The website says up through 35.

[KiWinUS]

Originally Posted by Yoyodyne

Do these work on a 36? The website says up through 35.

Ted has them for 36 yes. They work fantastic

[john greco]

O yea , have a set on my. 36 truck , it will put u threw the windshield

[oldford]

Unless they have improved them a lot in the last 15 years, I was not impressed with the kit.

[dean333]

I have a set of the floaters. I sold all of my 33 to 36 models. I no longer have any need for them.
Tim 678-773-5764 text is best. Also [email protected]
Kit fits 32-38 models.

[john greco]

Hi old ford , there must of been something else wrong in your brakes , were the shoes woven ? Were they arc to drums ? All your bushings etc good ? No lie my truck and coupe will lock all 4 wheels.

[azlkk]

Just installed them on our ‘35 coupe. No problems with the fronts but the rears couldn’t adjust. Screwed in the adjusters until the end caps got pushed out without getting close to locking the wheels. Has anybody had this issue? I’m back to the OEM adjusters now for the rear.

[slow8]

Snyders sells them in the US. They have a couple of different versions of the kit. They aint cheap.

I believe they will work on all Model A as well as 32-35.