The Ford Barn

Bigfoot61 · 10-26-2024, 08:09 PM

My generator pulley failed (shown). Bought the wrong one on eBay. The wrong one is a different taper, and the hole (on the yellow paper side) is too large on the wrong one. What is the right item and where can I buy it?

The Master Cylinder · 10-26-2024, 10:00 PM

Most of the vendors carry new generator pulleys https://www.snydersantiqueauto.com/p...6052&cat=41710 or you can check with Steve at Bert's for used.

rotorwrench · 10-29-2024, 09:52 AM

Sponsored Links (Register now to hide all advertisements)

You just need to know the length of the shaft tapered end. There were long nose and short nose types. Ford used several styles of generators as well. Many of them ended up with the late Autolite type due to overhaul exchanges over the years.

10-26-2024, 08:09 PM	#1
Bigfoot61 BANNED Join Date: Aug 2024 Location: Nampa, Idaho Posts: 14	Dear Expert My generator pulley failed (shown). Bought the wrong one on eBay. The wrong one is a different taper, and the hole (on the yellow paper side) is too large on the wrong one. What is the right item and where can I buy it?

10-26-2024, 10:00 PM	#2
The Master Cylinder Senior Member Join Date: Aug 2012 Location: The Moon Posts: 999	Re: Dear Expert Most of the vendors carry new generator pulleys https://www.snydersantiqueauto.com/p...6052&cat=41710 or you can check with Steve at Bert's for used. __________________ The Master Cylinder Enjoying life at the beach in SoCal...

10-29-2024, 09:52 AM	#3
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 17,410	Re: Dear Expert Sponsored Links (Register now to hide all advertisements) You just need to know the length of the shaft tapered end. There were long nose and short nose types. Ford used several styles of generators as well. Many of them ended up with the late Autolite type due to overhaul exchanges over the years.