|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-17-2023, 02:13 PM | #1 |
Senior Member
Join Date: May 2010
Location: albany
Posts: 468
|
Clutch finger adjustment
So have to ask what is the correct measurement from back of cover to the fingers? Im reading 11/16 or 3/4 depending on the source. Ive checked some old pressure plates with new disks and usually get 7/8 or close. Does it really matter what it is as long as they are all set the same?
|
07-17-2023, 04:26 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 3,134
|
Re: Clutch finger adjustment
Attached is an article about how I do it.
http://www.santaanitaas.org/wp-conte...adjustment.pdf Tom Endy |
Sponsored Links (Register now to hide all advertisements) |
|
07-17-2023, 06:31 PM | #3 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: Clutch finger adjustment
Sponsored Links (Register now to hide all advertisements)
While in the car I just set them to contact at the same time. Both ways set to within .002" |
|
|
Sponsored Links (Register now to hide all advertisements) |
|