The Ford Barn

Lenny Bruce · 07-31-2022, 09:53 AM

Hello guys. I was greasing my Tudor the other day and noticed the previous owner had disassembled the radius arm. The spacers and springs are missing that hold the ball in place. It was just put back together with the castle nuts. My question is would it be a wise choice to just put the whole kit in and be done with it rather then just replace the spacers/sleeves and springs? I was wondering if replacing the wick for the oil is a pain in the hump? Any insight would be greatly appreciated.

07-31-2022, 09:53 AM	#1
Lenny Bruce Senior Member Join Date: Apr 2022 Posts: 362	Radius Arm Hello guys. I was greasing my Tudor the other day and noticed the previous owner had disassembled the radius arm. The spacers and springs are missing that hold the ball in place. It was just put back together with the castle nuts. My question is would it be a wise choice to just put the whole kit in and be done with it rather then just replace the spacers/sleeves and springs? I was wondering if replacing the wick for the oil is a pain in the hump? Any insight would be greatly appreciated.