|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-23-2020, 03:37 PM | #1 |
Senior Member
Join Date: Oct 2019
Location: Niagara Falls Canada
Posts: 117
|
late flathead in early chassis, hoses.
The rad hoses for the lower fit between the late 8BA engine and early chassis
are Ford Bronco 1986 to 91 Carquest - Dayco # D71038. This offset cut off about 6 1/2' long will solve the problem of hose alignment on this engine /frame combo. Like it was made for Flatheaders. |
06-23-2020, 06:19 PM | #2 | |
Senior Member
Join Date: Aug 2010
Location: newark, delaware
Posts: 3,735
|
Re: late flathead in early chassis, hoses.
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
06-23-2020, 11:14 PM | #3 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,667
|
Re: late flathead in early chassis, hoses.
Old number was 21236(Carquest) and I have them on my 8BA in 32 chassis.
|
06-24-2020, 12:41 PM | #4 |
Member
Join Date: Nov 2013
Location: Cincinnati, Ohio
Posts: 41
|
Re: late flathead in early chassis, hoses.
I also used a Gates hose #21236 for 8BA in ‘32 frame. Worked well.
|
06-24-2020, 01:10 PM | #5 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,806
|
Re: late flathead in early chassis, hoses.
Are these numbers good for 59A in a 32 frame?
|
06-24-2020, 01:30 PM | #6 |
Senior Member
Join Date: May 2010
Location: near Washington, DC
Posts: 561
|
Re: late flathead in early chassis, hoses.
Sponsored Links (Register now to hide all advertisements)
__________________
Those who do not move do not die, but are they not already dead? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|