1930 Pickup Cab & Box

[RJV]

For sale is a late 1930 Pickup cab and a narrow box (only). It is a fine-point judging project. As you know back-in-the-day trucks were used as trucks and left outside while passenger cars were more apt to be stored inside. So, it is difficult to find/do one of these for show. Mark Welch of Toledo, Ohio did the metal work. For reference, he restored Bill Edstrom's Best of Show 400-A at the MAFCA National Meet a few years ago. Also, a Henry winner in MARC. He also started Dean's early '28 Phaeton before his untimely passing. At any rate he's the best metal worker I've known.

Both cab & box have been down to bare metal and epoxy primed (the shade differences in the pics are due to scuffing the epoxy). The box is a Brookville but modified to original details.

I've come to the conclusion, that I physically can not complete this project so therefore it is for sale. $6995 for the cab & box (only). Pick up here, no pun intended! It's a good option for those with extra parts. Can supply all other parts(some restored for show, rebuilt, new, in process, the best I've owned, etc.) on an as-wanted/needed basis at separate prices and only with the sale of the cab/box.

Note: At the above price I will "throw in" two gallons of PPG Vermillion (red) acrylic lacquer. Last time I checked the cost was over $700 per gallon.