The Ford Barn

jg61hawk · 04-03-2015, 07:04 PM

I'm sure most, if not all, of us watch cars shows on TV. I watch The Velocity Channel. I always saw the ad for Speed Out, so I mentioned I may buy one. The wife saw them in TARGET (I thought they were only available through TV ordering) so she beat me to the punch. It is basically an easy out on steroids.

I wanted to remove the screws from the stantions on my 1929 Roadster. I tried heat, tried big old screwdriver with a wrench, tried PB Blaster, tried the hammer trick of whacking the head after heating....nothing worked so I thought well I've got nothing to lose.

The Speed Out has a drill on one end and the gripping part on the other. You use the drill in reverse for both applications. The thing grabbed that screw so hard it almost twisted the drill out of my hands. JUST AN FYI.

04-03-2015, 07:04 PM	#1
jg61hawk Senior Member Join Date: Oct 2014 Location: Central New Jersey Posts: 428	TV Tool: Speed Out-WORKS! I'm sure most, if not all, of us watch cars shows on TV. I watch The Velocity Channel. I always saw the ad for Speed Out, so I mentioned I may buy one. The wife saw them in TARGET (I thought they were only available through TV ordering) so she beat me to the punch. It is basically an easy out on steroids. I wanted to remove the screws from the stantions on my 1929 Roadster. I tried heat, tried big old screwdriver with a wrench, tried PB Blaster, tried the hammer trick of whacking the head after heating....nothing worked so I thought well I've got nothing to lose. The Speed Out has a drill on one end and the gripping part on the other. You use the drill in reverse for both applications. The thing grabbed that screw so hard it almost twisted the drill out of my hands. JUST AN FYI.