Crank drilling Q....

[hardtimes]

For you guys that have machine shop and drill B cranks...how much can I expect to pay for this work. Anyone here have that done and cost
I have a couple late Ford B cranks and considering full pressure. Can any machine shop do this work ...or look for experienced crank shop ?

[colin1928]

Here I pay around $ 300-$350 for method A and $500-600 for method B

[AL in NY]

Schwalms did a counterweighted and drilled crank for me a few years ago and the price was $750.00. I have seen that just doing a counterweighted crank goes around $450-500, so I would say that just drilling for full pressure would be about $250-300. I would also have this work performed by an experienced shop, as the angle and placement of the cross-drilled holes is very critical.

[hardtimes]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by AL in NY

Schwalms did a counterweighted and drilled crank for me a few years ago and the price was $750.00. I have seen that just doing a counterweighted crank goes around $450-500, so I would say that just drilling for full pressure would be about $250-300. I would also have this work performed by an experienced shop, as the angle and placement of the cross-drilled holes is very critical.

Hey Al,
Thanks! I've located a crank shop owner out here that specializes in nothing but crankshafts. Will get in touch with him/his shop !