The Ford Barn

41panelmark · 11-30-2014, 01:50 PM

Have you guys seen this?

https://www.youtube.com/watch?v=DJx7gKYPp-c

Gets a guy thinking for sure.

uncle max · 11-30-2014, 02:36 PM

Lose the soundtrack and you might have something.
Nice little glimpse of Paul Howard though...

Blu Dice · 11-30-2014, 02:59 PM

How do we get it??

VeryTangled · 11-30-2014, 03:10 PM

Thanks for the heads-up 41panelmark,

Official site here: http://www.atomichotrods.com/Atomic_...%28DVD%29.html

The subject matter looks like it is pretty cool. If the trailer is anything like the 60 minute movie, then I have doubts that I could handle it. The music by The Scrapers is not quite like I expect a lot of 'Barn'ers have going in the garage.

I think it's been out since 2011, waiting for reviews...

Here's the storyline, copied from IMDB:
Storyline

Join Hot Rod Builder and Award Winning Filmmaker Brian Darwas, as he sits down and talks the world's top engine builders and fabricators about the engine that pioneered a movement, The Ford Flathead. Learn speed secrets from Vern Tardel. Get an in depth look at the build of of two high powered Flathead motors by Mike Herman (H&H) and Ronnie SanGiovani. Hear the stories that inspired Ryan Cochran to begin one of the most popular Hot Rodding networks in the world today, and ride along with Vern Hammond and Jack Carroll of The Burbank Choppers in their Flathead powered, traditional Hot Rods! Written by Atomic Hot Rods

41panelmark · 11-30-2014, 04:44 PM

Quote:

Originally Posted by VeryTangled

Thanks for the heads-up 41panelmark,

Official site here: http://www.atomichotrods.com/Atomic_...%28DVD%29.html

The subject matter looks like it is pretty cool. If the trailer is anything like the 60 minute movie, then I have doubts that I could handle it. The music by The Scrapers is not quite like I expect a lot of 'Barn'ers have going in the garage.

I think it's been out since 2011, waiting for reviews...

Here's the storyline, copied from IMDB:
Storyline

Join Hot Rod Builder and Award Winning Filmmaker Brian Darwas, as he sits down and talks the world's top engine builders and fabricators about the engine that pioneered a movement, The Ford Flathead. Learn speed secrets from Vern Tardel. Get an in depth look at the build of of two high powered Flathead motors by Mike Herman (H&H) and Ronnie SanGiovani. Hear the stories that inspired Ryan Cochran to begin one of the most popular Hot Rodding networks in the world today, and ride along with Vern Hammond and Jack Carroll of The Burbank Choppers in their Flathead powered, traditional Hot Rods! Written by Atomic Hot Rods

Thanks VT. I enjoyed seeing the cars anyhow.

Head on over to: http://www.AtomicHotRods.com to get the complete movie!

Tinker · 12-01-2014, 02:33 PM

Sponsored Links (Register now to hide all advertisements)

I have that one. I've watched it a few times and enjoyed it each time. If you don't like the open music, I'll just say its not a precursor for the rest of the dvd. But expect a little hotrod vibe.

PeterC · 12-01-2014, 04:27 PM

My 35 Three Window Coupe engine build is featured in this movie - the blown flathead that Ron San Giovanni was shown building - sitting under that hood of the Coupe in my avatar

Quote:

Originally Posted by Tinker

I have that one. I've watched it a few times and enjoyed it each time. If you don't like the open music, I'll just say its not a precursor for the rest of the dvd. But expect a little hotrod vibe.

V8COOPMAN · 12-01-2014, 04:35 PM

EVERY detail on that engine is just so RIGHT ! DD

PeterC · 12-01-2014, 04:42 PM

Dave Simard did all the external engineering , fabrication and final assembly of this engine - he is an absolute perfectionist!

Quote:

Originally Posted by V8COOPMAN

EVERY detail on that engine is just so RIGHT ! DD

V8COOPMAN · 12-01-2014, 04:44 PM

Hell, the WHOLE damn car is perfection! DD

Ianrhall · 12-01-2014, 05:11 PM

Free shipping today!

Tinker · 12-01-2014, 10:39 PM

Quote:

Originally Posted by PeterC

My 35 Three Window Coupe engine build is featured in this movie - the blown flathead that Ron San Giovanni was shown building - sitting under that hood of the Coupe in my avatar

I'll have to watch it again. Yeah twist my arm. By the way I have no gain or any affiliation at all, but liked the dvd. I just enjoyed it personally.

Fordestes · 12-02-2014, 09:10 AM

Does the music plAy like that alL through the movie? if so can you get a copy without all that noise?

JSeery · 12-02-2014, 09:17 AM

I've had that DVD for over a year or so.

Bertha · 12-02-2014, 09:18 AM

Quote:

Originally Posted by uncle max

Lose the soundtrack and you might have something.
Nice little glimpse of Paul Howard though...

Old Flatheads need the correct music

https://www.youtube.com/watch?v=t_srigbxNhA

Bob

deuce_roadster · 12-02-2014, 11:54 AM

DEFINITELY turn the sound OFF before watching this. Visuals are good.

jkeesey · 12-02-2014, 01:08 PM

I'm just gonna add that to my Christmas list.

41panelmark · 12-02-2014, 06:02 PM

I agree, better music would help.

slowforty · 12-02-2014, 06:23 PM

If it is too loud you are too old!
Me I am too Deaf.

outlaw · 12-03-2014, 12:31 AM

This thread reminded me that I have wanted to buy that DVD. Brian has a special on at this time for all 5 of his DVD's for $99.00 postage paid to your door so I bought them all. Thank you for reminding me. Bill

11-30-2014, 01:50 PM	#1
41panelmark Senior Member Join Date: May 2010 Location: Colorado Posts: 1,264	Flat head movie...... Have you guys seen this? https://www.youtube.com/watch?v=DJx7gKYPp-c Gets a guy thinking for sure.

11-30-2014, 02:36 PM	#2
uncle max Senior Member Join Date: May 2010 Location: SLC Utah Posts: 808	Re: Flat head movie...... Lose the soundtrack and you might have something. Nice little glimpse of Paul Howard though... __________________ RIP Tyler... My Son, Helper & Best Friend. Feb '78 to Father's Day '10. www.97-express.com ~ [email protected]

11-30-2014, 02:59 PM	#3
Blu Dice Senior Member Join Date: Jul 2010 Location: Plainfield, IN Posts: 360	Re: Flat head movie...... How do we get it??

11-30-2014, 03:10 PM	#4
VeryTangled Senior Member Join Date: May 2010 Location: (Not far enough...) Outside of DC Posts: 3,395	Re: Flat head movie...... Thanks for the heads-up 41panelmark, Official site here: http://www.atomichotrods.com/Atomic_...%28DVD%29.html The subject matter looks like it is pretty cool. If the trailer is anything like the 60 minute movie, then I have doubts that I could handle it. The music by The Scrapers is not quite like I expect a lot of 'Barn'ers have going in the garage. I think it's been out since 2011, waiting for reviews... Here's the storyline, copied from IMDB: Storyline Join Hot Rod Builder and Award Winning Filmmaker Brian Darwas, as he sits down and talks the world's top engine builders and fabricators about the engine that pioneered a movement, The Ford Flathead. Learn speed secrets from Vern Tardel. Get an in depth look at the build of of two high powered Flathead motors by Mike Herman (H&H) and Ronnie SanGiovani. Hear the stories that inspired Ryan Cochran to begin one of the most popular Hot Rodding networks in the world today, and ride along with Vern Hammond and Jack Carroll of The Burbank Choppers in their Flathead powered, traditional Hot Rods! Written by Atomic Hot Rods __________________ -Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum?

12-01-2014, 02:33 PM	#6
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,063	Re: Flat head movie...... Sponsored Links (Register now to hide all advertisements) I have that one. I've watched it a few times and enjoyed it each time. If you don't like the open music, I'll just say its not a precursor for the rest of the dvd. But expect a little hotrod vibe.

12-01-2014, 04:35 PM	#8
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,184	Re: Flat head movie...... EVERY detail on that engine is just so RIGHT ! DD __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

12-01-2014, 04:44 PM	#10
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,184	Re: Flat head movie...... Hell, the WHOLE damn car is perfection! DD __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

12-01-2014, 05:11 PM	#11
Ianrhall Senior Member Join Date: Apr 2014 Posts: 253	Re: Flat head movie...... Free shipping today!

12-02-2014, 09:10 AM	#13
Fordestes Senior Member Join Date: May 2010 Posts: 931	Re: Flat head movie...... Does the music plAy like that alL through the movie? if so can you get a copy without all that noise?

12-02-2014, 09:17 AM	#14
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Flat head movie...... I've had that DVD for over a year or so.

12-02-2014, 11:54 AM	#16
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 3,971	Re: Flat head movie...... DEFINITELY turn the sound OFF before watching this. Visuals are good.

12-02-2014, 01:08 PM	#17
jkeesey Senior Member Join Date: Apr 2011 Location: Glenmoore Pa Posts: 1,644	Re: Flat head movie...... I'm just gonna add that to my Christmas list.

12-02-2014, 06:02 PM	#18
41panelmark Senior Member Join Date: May 2010 Location: Colorado Posts: 1,264	Re: Flat head movie...... I agree, better music would help.

12-02-2014, 06:23 PM	#19
slowforty Senior Member Join Date: May 2010 Location: Tinley Park Ill Posts: 1,178	Re: Flat head movie...... If it is too loud you are too old! Me I am too Deaf.

12-03-2014, 12:31 AM	#20
outlaw Senior Member Join Date: May 2010 Location: Eagle River,Alaska Posts: 370	Re: Flat head movie...... This thread reminded me that I have wanted to buy that DVD. Brian has a special on at this time for all 5 of his DVD's for $99.00 postage paid to your door so I bought them all. Thank you for reminding me. Bill