|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-14-2014, 10:23 PM | #1 |
Member
Join Date: Mar 2013
Location: Ft.Mill, south carolina
Posts: 52
|
28 Tudor-How do you remove rear window glass?
I have a 1928 Tudor that needs to have the rear window glass channel's removed. I can roll the window approx. 1/2 way down and it will roll back up. But if I try and roll it all the way down it sounds like the channel is hitting a bolt because when I try to roll it back up it will only go up 1/2 way and you can hear it hitting something. When this happens I have to take the side panel off and then pull a little on the channel and on the middle frame bracket and then push up the glass and it will go past the bolt or whatever it is that the channel is getting stuck on. The channel is rusted appears wider than I have seen in pictures. How do I get the glass out of the channel. It is original glass and channel stuck together with the glass bedding?
Any advice would be greatly appreciated Randy |
10-15-2014, 08:50 PM | #2 |
Senior Member
Join Date: Jun 2010
Posts: 1,854
|
Re: 28 Tudor-How do you remove rear window glass?
a big hammer sometimes helps
|
Sponsored Links (Register now to hide all advertisements) |
|
10-15-2014, 09:30 PM | #3 |
Senior Member
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,372
|
Re: 28 Tudor-How do you remove rear window glass?
Take it all apart and fix it right. Pull of the upholstery panals etc.
|
10-17-2014, 08:24 PM | #4 |
Senior Member
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,177
|
Re: 28 Tudor-How do you remove rear window glass?
I have been waiting for this post :-) thanks John Duden !!
|
10-17-2014, 09:26 PM | #5 |
Senior Member
Join Date: Jun 2010
Posts: 1,854
|
Re: 28 Tudor-How do you remove rear window glass?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|