|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-17-2014, 09:19 PM | #241 |
Senior Member
Join Date: Nov 2010
Location: Fairbanks, Alaska
Posts: 767
|
Re: Model A motor froze-up
[QUOTE=BetsyModelA;
Betsy is running nicely. Only problem, her muffler fell off. Ha! Didn't know she could backfire like that. Made her stop. I crawled under and shoved the two parts together to get home. Now I need to buy a new muffler. Or, do I?[/QUOTE] Not necessarily, as long as the pipe or the side of the muffler didn't split or spit the guts out somewhere you should be fine. Make sure the exhaust flange to manifold line up straight. Darryl in Fairbanks |
09-18-2014, 09:57 PM | #242 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
darrylkmc,
Thanks for your helpful response. I managed to shove the long pipe into the bigger round part (not sure what it is called). Should I be welding the two parts together? I know the two parts will come apart again. Perhaps, I can find some baling wire to hold them together for a more permanent fix. |
Sponsored Links (Register now to hide all advertisements) |
|
09-19-2014, 01:41 PM | #243 | |
Senior Member
Join Date: Nov 2010
Location: Fairbanks, Alaska
Posts: 767
|
Re: Model A motor froze-up
Quote:
Darryl in Fairbanks |
|
09-19-2014, 10:11 PM | #244 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
I'll try the photo. Not real technologically savy, so need to work on it.
|
09-20-2014, 12:16 PM | #245 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
If you go to my homepage you will see two pictures I took of the muffler. I was unable to pull the two apart for a picture. However, in one of the photos you can see not only where it is broken apart, but also a rusted out hole. Suggestions appreciated.
|
09-20-2014, 12:22 PM | #246 |
Senior Member
Join Date: May 2010
Location: Stayton, Oregon
Posts: 3,806
|
Re: Model A motor froze-up
Sponsored Links (Register now to hide all advertisements)
__________________
Fred Kroon 1929 Std Coupe 1929 Huckster |
09-21-2014, 09:10 PM | #247 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
Fred K-OR, I was afraid someone would tell me to put on a new one. I'm not surprised. Guess I better start looking. I'll try ebay.
|
09-22-2014, 02:00 PM | #248 |
Senior Member
Join Date: May 2010
Location: North Carolina
Posts: 611
|
Re: Model A motor froze-up
All of the part houses carry them. I think I would make it easier on yourself and just order through them. Then you know you are not getting junk either. If you are in ND then I would probably try Snyder's or Berts. They are a little closer to you and may be less shipping.
|
09-22-2014, 02:25 PM | #249 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
You're right, 31 Tudor, I wasn't thinking of the size and bulk of the object. I have ordered from Snyder's before. Sometimes it was the right part, sometimes not. I hate sending back. I'm not familiar with Berts.
|
09-22-2014, 02:51 PM | #250 |
Senior Member
Join Date: May 2010
Location: Tulsa Oklahoma
Posts: 298
|
Re: Model A motor froze-up
No,No, Go to Berts, Snyders or Brattons, or a vendor of your choice. Then compare with your Ebay find. Always good to support our vendors. How do I find your webpage? Thanks, Russell. (I need to get one also.)
|
09-22-2014, 03:44 PM | #251 |
Senior Member
Join Date: Feb 2014
Location: Florida - 32128
Posts: 416
|
Engine knock problem
Saturday, out for a fun ride (40 -50 miles), I inherited a steady motor knock. When I rev-up to a steady rpm, I get an internal medium knock. Can't be a rod, because it knocks fairly light and steady, but it does knock harder under load - revving it up or on the road, up a grade. Move the spark up to the "start" area and the knock is a little less than real hard and no powere
I need to find an "A" motor mechanic in my area. A couple of Ford Barn partners have sent me a person in Ashville, NC - James Rogers, but I can't locate him. Does anyone know of a good reliable "A" person close by and near Spartanburg - Greenville, South Carolina, to help me out ? |
09-22-2014, 05:50 PM | #252 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
Russel, Did you try BetsyModelA?
|
09-22-2014, 06:01 PM | #253 | |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,847
|
Re: Engine knock problem
Quote:
|
|
09-25-2014, 08:53 AM | #254 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
Russell, thanks for introducing me to Bert's. I am finding mufflers - they are spendy! Now, to find one that fits at an afordable price.
|
05-24-2016, 10:06 PM | #255 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Model A motor froze-up
Just when you thought things couldn't get any worse...........they actually got better.
Somehow I don't recall seeing the pictures in dishady's reply in #27. The first picture looks like total junk, but the second picture looks like a completely different tranny. BTW, with 255 replies, some 37,000 views, and no pictures, did this thread really happen? |
05-25-2016, 12:51 PM | #256 |
Senior Member
Join Date: Jul 2011
Location: Elko Nevada
Posts: 217
|
Re: Model A motor froze-up
Do yourself a favor and pull the engine, the cost will most likely be a gasket set. Pulling, pounding and twisting are a great way to make a good engine into a bad engine. Rebuilds are very expensive and you will kick yourself if you ruin the engine in an effort to break it loose. After such a long time sitting, you need to pull the oil pan at the very least and clean the dip tray of sludge and or water. It's really not that hard and if the parts are all serviceable, it will go back together without too much trouble and run for many years.
Last edited by Marshall57; 05-25-2016 at 12:52 PM. Reason: wrong word |
05-25-2016, 05:56 PM | #257 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Model A motor froze-up
The engine is loose and has been run, but I was hoping to see some pictures.
|
05-25-2016, 06:57 PM | #258 |
Senior Member
Join Date: Mar 2011
Location: Riverview, Michigan
Posts: 127
|
Re: Model A motor froze-up
So is BetsyModelA tearing up the streets of Harvey these days? Does anybody know? I just looked at the pic in her profile, that's a nice looking truck !! Slightly used I'd call it.I'd leave it just the way it is!
Last edited by SkimmerBob; 05-26-2016 at 05:29 PM. Reason: Poor Puncuation :( |
|
|
Sponsored Links (Register now to hide all advertisements) |
|