Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-01-2014, 10:21 AM   #3
shaefer
Member
 
shaefer's Avatar
 
Join Date: Apr 2014
Location: Georgia
Posts: 33
Default Re: "Sticky" ignition

The spark lever is fully advanced (all the way down) during startup. The start up routine is: advance spark level to the fully-down position, one hand on the throttle and one on the choke, depress the ignition. If it doesn't kick in right away then give one short pull on the choke and feather the throttle just a bit. That works every time...up until recently.

Spark advance lever all the way down (advanced) is where it runs best and, honestly, we've only ever used the spark advance either all the way up for idling or all the way down for driving.
shaefer is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:44 PM.