Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-12-2013, 05:13 PM   #11
TStiles
Senior Member
 
Join Date: Sep 2012
Location: Kitsap Peninsula, Western WA
Posts: 276
Default Re: Best rust solution?

I like the looks and sounds of the Evapo-Rust. I'd not heard of it before and just read up all about it. I wanted to make sure that it was safe for engine blocks. Sure enough. Here are the instructions on the web site for cooling systems. Looks like it shouldn't take more than overnight.

1. Drain cooling system and rinse with water.
2. Fill system with Evapo-Rust®. (Do NOT dilute.)
3. Run Engine under normal conditions, shut engine down and let sit, for a couple hours to overnight.
4. Drain system into a container for later use.
5. Flush system with water.
6. Repeat process (1-5) if necessary.
7. Fill system with proper coolant/antifreeze.

I've got my two test chemicals now. I'm going to soak one pump in vinegar and the other in Evapo-Rust and photograph them each day to see what happens and report.

Thanks for your ideas. Hope one of them work.


'Looks like you might be onto something. Please keep us posted on this.
TStiles is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:38 PM.