The Ford Barn

insomniacshotrods · 11-07-2013, 05:35 AM

So i take it that the head studs do not go into any water jackets on the model a ? Sorry never seen one with the head off and couldnt find it in the search index. Only experience ive had with head studs have been with the sbc blower motor. I used the arp junk sealant and it leaked when i fired it up. So i had the pleasure of taking each one out, one at a time in torque sequence, putting permatex 2 on em, and running them back down . I was told to bottom them out then back them off just a little.

11-07-2013, 05:35 AM	#7
insomniacshotrods Senior Member Join Date: Jun 2013 Location: Carthage, Missouri Posts: 267	Re: Head Studs So i take it that the head studs do not go into any water jackets on the model a ? Sorry never seen one with the head off and couldnt find it in the search index. Only experience ive had with head studs have been with the sbc blower motor. I used the arp junk sealant and it leaked when i fired it up. So i had the pleasure of taking each one out, one at a time in torque sequence, putting permatex 2 on em, and running them back down . I was told to bottom them out then back them off just a little.