The Ford Barn

4tford · 05-11-2010, 01:49 PM

Hi Guys, I have 4 intakes to identify. Please refer to the numbers. Thanks Bill

Bruce Lancaster · 05-11-2010, 02:14 PM

One is clearly 1933...four with low gen mount would likely be 1937, carb tilter not original...
Three is typical 1934.
I think two is '35-6, but there was a similar one used in 1934 amongst the several variants. Any prefixes on it...40, 48, etc?

Mike in AZ · 05-11-2010, 02:43 PM

three could also be early '35....two might be late '35....Mike

4tford · 05-12-2010, 05:34 PM

Sponsored Links (Register now to hide all advertisements)

Thanks Guys, I will see what #'s are on them. Not much though, Bill

05-11-2010, 01:49 PM	#1
4tford Senior Member Join Date: May 2010 Location: Regina Canada Posts: 1,335	Need help to identify some intakes Hi Guys, I have 4 intakes to identify. Please refer to the numbers. Thanks Bill Last edited by 4tford; 08-05-2020 at 08:03 AM.

05-11-2010, 02:14 PM	#2
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: Need help to identify some intakes One is clearly 1933...four with low gen mount would likely be 1937, carb tilter not original... Three is typical 1934. I think two is '35-6, but there was a similar one used in 1934 amongst the several variants. Any prefixes on it...40, 48, etc?

05-11-2010, 02:43 PM	#3
Mike in AZ Senior Member Join Date: May 2010 Location: Waddell, AZ Posts: 2,540	Re: Need help to identify some intakes three could also be early '35....two might be late '35....Mike

05-12-2010, 05:34 PM	#4
4tford Senior Member Join Date: May 2010 Location: Regina Canada Posts: 1,335	Re: Need help to identify some intakes Sponsored Links (Register now to hide all advertisements) Thanks Guys, I will see what #'s are on them. Not much though, Bill