|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
![]()
Hey guys, I'm hoping someone out here has body dimensions for my 29 Tudor Sedan. Body is all stock, no wood involved.
I'm particularly interested in left-right measurements above the roof edges and getting my door alignments right. My right side front-roof area is splayed out some, windshield area seems fine. Any suggestions? Thanks! John
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
![]()
Anybody? I assume the front upper roof edges are parallel ahead of the doors? Or do they taper inwards some?
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... ![]() |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
![]()
You might have better luck on the Model A Forum.
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Jul 2011
Location: Pewaukee, WI (Milwaukee)
Posts: 50
|
![]()
I have a 29 tudor that i can measure, but i don't really understand what you need.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Canterbury, New Zealand
Posts: 1,242
|
![]()
I also have one that I will measure if you explain exactly what you require.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
![]() Sponsored Links (Register now to hide all advertisements)
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... ![]() |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: May 2010
Location: grass valley ca.
Posts: 75
|
![]()
on my 31 2 dr. they taper down to where meet the top of the door. reguards dick t.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
![]()
OK, that's what I did too. Everything else seems right on so far! Now I just gotta get past my surgery and get back on things!
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... ![]() |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Location: Canterbury, New Zealand
Posts: 1,242
|
![]()
The outer edge tapers towards the front pillar, exactly as the top edge of the door does.
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,800
|
![]()
If you think the one side looks all right, you can string a center line down the center and make the bad side match the good side.
Mart. |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|