The Ford Barn

NDTMAN · 10-06-2011, 07:01 AM

Interest in wheels if you do

fender bender · 10-09-2011, 08:21 AM

Looking for 3.54:1 ring and pinion old stock banjo style and grill for 40 ford pickup. Thanks, Max

macs67 · 10-10-2011, 12:00 AM

40 1/2 ton standard hood ornament, nose piece?
Hinges?
Supports?
All latch/opening hardware?
thanks

ford1946 · 10-10-2011, 12:10 AM

hello-

I am new to this site but I am looking to try and find a title for a 46 ford that I have. I would settle for any year that is close to it.

Thank you

lonewolf · 10-11-2011, 09:02 AM

Hello I just sent you an email, I'm looking for a usable roof for a 35-36 ford pickup. I have a rust free cab that some kids used as a jungle gym and crushed the roof down 3" below the tops of the doors,thanks

gilspony · 10-13-2011, 12:12 PM

Sponsored Links (Register now to hide all advertisements)

hi jim, looking for 35" 38" pickup rear window moulding, in good condition. if at all possable i rearlly could use 2. please let me know the price for them also. my email address is [email protected] THANKS GIL

russcc · 11-08-2011, 08:09 PM

Hi Aircooled

Any 40 thru 46 column mast jackets ? If so what kind of shape & price. Thanks, Russ

fasttrack · 11-24-2011, 07:50 AM

Hi looking for a nice hood and sides for a 1935 ford truck!

jvanhoover · 12-05-2011, 09:41 AM

Hey I am looking for a drivers door for my 1 1/2 ton 35, Also need gauges for dash. THis is all new to me, what is the column drop on the steering? I am looking for steering wheel and key assem. as well. Steering wheel seems to be seized up. thanks for your time.

35 fordratrod · 01-05-2012, 07:03 AM

i am about to buy a 1935 ford 1.5 t truck what i only wanna use the chassis , cab and grill to make it in to a ratrod running 351 , 4 speed manual , 9" diff shorten it , lower it possible ? i am locking for a complete right side door for it as it is missing are they hard to get ? i think the cap and grill is the same as in the pickup

ejayfordman · 01-08-2012, 03:16 PM

I need both inner fenders and all the fender braces (front and rear) for a '35-'36 Ford pickup. I also need a decent driver's side running board. Email me at [email protected] When would be a good time to call?

Aircooled1 · 01-23-2012, 12:15 PM

Call 530-384-1651 after 10:00AM PST........ Bump...

JP58854 · 02-05-2012, 10:28 AM

Looking for front Grille

JP58854 · 02-05-2012, 10:29 AM

Looking for Grille 36 ford pickup

philhauser · 03-28-2012, 04:35 PM

need clutch brake pedal assembly for 41 ford pickup call phil 401-397-56356

philhauser · 03-28-2012, 04:37 PM

need clutch brake assembly for41 ford pickup call401-397-5636

ajsrodshop · 04-08-2012, 10:33 PM

hey looking for a 39 ford drivers door , do you got one how much . can you send pictures to [email protected] thanks, Aaron

ajsrodshop · 04-09-2012, 06:57 PM

do you got a 1939 ford truck title and how much , you can email at [email protected] . thanks Aaron

Gordon Ellis · 04-09-2012, 08:30 PM

Looking for grill for 41 Ford p.u. half ton. Reply to [email protected]. Thanks

hooligan514 · 04-12-2012, 11:50 AM

Got any 1936 Pickup doors? How much you asking?

10-06-2011, 07:01 AM	#61
NDTMAN Member Join Date: Apr 2011 Location: Michigan Posts: 32	Re: 1935-1941 Ford Pickup Parts Interest in wheels if you do

10-09-2011, 08:21 AM	#62
fender bender Junior Member Join Date: May 2010 Posts: 11	Re: 1935-1941 Ford Pickup Parts Looking for 3.54:1 ring and pinion old stock banjo style and grill for 40 ford pickup. Thanks, Max

10-10-2011, 12:00 AM	#63
macs67 Member Join Date: Oct 2010 Location: pacific north west Posts: 30	Re: 1935-1941 Ford Pickup Parts 40 1/2 ton standard hood ornament, nose piece? Hinges? Supports? All latch/opening hardware? thanks

10-10-2011, 12:10 AM	#64
ford1946 Junior Member Join Date: Oct 2011 Location: Ransom,PA Posts: 2	Re: 1935-1941 Ford Pickup Parts hello- I am new to this site but I am looking to try and find a title for a 46 ford that I have. I would settle for any year that is close to it. Thank you

10-11-2011, 09:02 AM	#65
lonewolf Senior Member Join Date: May 2010 Location: Michigan Posts: 496	Re: 1935-1941 Ford Pickup Parts Hello I just sent you an email, I'm looking for a usable roof for a 35-36 ford pickup. I have a rust free cab that some kids used as a jungle gym and crushed the roof down 3" below the tops of the doors,thanks

10-13-2011, 12:12 PM	#66
gilspony Junior Member Join Date: Nov 2010 Posts: 2	Re: 1935-1941 Ford Pickup Parts Sponsored Links (Register now to hide all advertisements) hi jim, looking for 35" 38" pickup rear window moulding, in good condition. if at all possable i rearlly could use 2. please let me know the price for them also. my email address is [email protected] THANKS GIL

11-08-2011, 08:09 PM	#67
russcc Senior Member Join Date: May 2010 Posts: 2,871	Re: 1935-1941 Ford Pickup Parts Hi Aircooled Any 40 thru 46 column mast jackets ? If so what kind of shape & price. Thanks, Russ

11-24-2011, 07:50 AM	#68
fasttrack Member Join Date: Nov 2011 Posts: 37	Re: 1935-1941 Ford Pickup Parts Hi looking for a nice hood and sides for a 1935 ford truck!

12-05-2011, 09:41 AM	#69
jvanhoover Junior Member Join Date: Aug 2011 Location: New York Posts: 16	Re: 1935-1941 Ford Pickup Parts Hey I am looking for a drivers door for my 1 1/2 ton 35, Also need gauges for dash. THis is all new to me, what is the column drop on the steering? I am looking for steering wheel and key assem. as well. Steering wheel seems to be seized up. thanks for your time.

01-05-2012, 07:03 AM	#70
35 fordratrod Junior Member Join Date: Jan 2012 Posts: 1	Re: 1935-1941 Ford Pickup Parts i am about to buy a 1935 ford 1.5 t truck what i only wanna use the chassis , cab and grill to make it in to a ratrod running 351 , 4 speed manual , 9" diff shorten it , lower it possible ? i am locking for a complete right side door for it as it is missing are they hard to get ? i think the cap and grill is the same as in the pickup

01-08-2012, 03:16 PM	#71
ejayfordman Junior Member Join Date: Mar 2011 Posts: 5	Re: 1935-1941 Ford Pickup Parts I need both inner fenders and all the fender braces (front and rear) for a '35-'36 Ford pickup. I also need a decent driver's side running board. Email me at [email protected] When would be a good time to call?

01-23-2012, 12:15 PM	#72
Aircooled1 Senior Member Join Date: May 2010 Posts: 834	Re: 1935-1941 Ford Pickup Parts Call 530-384-1651 after 10:00AM PST........ Bump...

02-05-2012, 10:28 AM	#73
JP58854 Junior Member Join Date: Feb 2012 Location: Watford City ND Posts: 5	Re: 1935-1941 Ford Pickup Parts Looking for front Grille

02-05-2012, 10:29 AM	#74
JP58854 Junior Member Join Date: Feb 2012 Location: Watford City ND Posts: 5	Re: 1935-1941 Ford Pickup Parts Looking for Grille 36 ford pickup

03-28-2012, 04:35 PM	#75
philhauser Junior Member Join Date: Feb 2012 Posts: 8	Re: 1935-1941 Ford Pickup Parts need clutch brake pedal assembly for 41 ford pickup call phil 401-397-56356

03-28-2012, 04:37 PM	#76
philhauser Junior Member Join Date: Feb 2012 Posts: 8	Re: 1935-1941 Ford Pickup Parts need clutch brake assembly for41 ford pickup call401-397-5636

04-08-2012, 10:33 PM	#77
ajsrodshop Senior Member Join Date: Mar 2012 Location: Terre Haute, IN Posts: 186	Re: 1935-1941 Ford Pickup Parts hey looking for a 39 ford drivers door , do you got one how much . can you send pictures to [email protected] thanks, Aaron

04-09-2012, 06:57 PM	#78
ajsrodshop Senior Member Join Date: Mar 2012 Location: Terre Haute, IN Posts: 186	Re: 1935-1941 Ford Pickup Parts do you got a 1939 ford truck title and how much , you can email at [email protected] . thanks Aaron

04-09-2012, 08:30 PM	#79
Gordon Ellis Member Join Date: May 2010 Posts: 54	Re: 1935-1941 Ford Pickup Parts Looking for grill for 41 Ford p.u. half ton. Reply to [email protected]. Thanks

04-12-2012, 11:50 AM	#80
hooligan514 Junior Member Join Date: Apr 2012 Posts: 3	Re: 1935-1941 Ford Pickup Parts Got any 1936 Pickup doors? How much you asking? __________________ "Primered in Rust" "Loud Pipes, Save Lifes" "If it's too Loud, You're too Old"